Home
 
Technical Parameters for Polyphenylene Sulphide (PPS)
| PPS Fiber
PPS Fiber Properties

Temperature

(ºC)

LOI

Melting Temperature

(ºC)

Moisture Regain

(% @20 ºC & 65% r. humidity)

Specific Density

(g/cm3)

Combustion Support
160 - 190 40 Decomposition @ 287 0.6 1.38 No
Chemical Resistance Alklais Mineral Acids Organic Acids Organic Solvents Oxidising Agents
Excellent Excellent Excellent Excellent Excellent *
PPS is a high temperature fibre, up to 180°C, with excellent chemical resistance except for oxidising agents such as NO2 and Oxygen itself. It has very good acid resistance and this, together with a good thermal resistance has led to wide acceptance in combustion processes.

The fibre is actually 30% sulphur by weight and it has a very high limiting oxygen index (34) when compared with the volume fibres.

 
 

Polyimide, also known as P84, is a high temperature fibre which under dry conditions can be operated up to 230°C.

It also benefits from a tri-lobal cross section which greatly enhances its filtration efficiency to the point that it is sometime used with much less expensive fibres to boost dust collection. In this application it usually forms a cap on the surface of the felt to exploit this property effectively.

It is a fibre with good chemical and thermal resistance, with only PTFE really exceeding it. Some care is needed with oxidising agents such as NO2 and the fibre can be sensitive to hydrolytic attack in hot wet conditions.

.

  Solitex® PPS Needle Felt    
| PPS Needle Felt (500gsm)
PPS Needle Felt
Layers / Scrim

Area Weight

(gsm)

Temperature

(ºC)

Thickness

(mm)

Air Permeability

(L/dm2.min @200Pa)

Strength at Break

(N/5 * 20cm)

Elongation

(@ 50N/5cm, %)

Max. Shrinkage

(210ºC, 90mins)

PPS 500 160 - 190 1.8 130 800TD / 1,000MD 2%TD / 2%MD 2%TD / 2%MD
Finishings Availbale Singeing, calendering, heat setting, water & oil repellency, anti-static, PTFE impregnation, PTFE membrane lamination.
*

The data are based on the properties of virgin fiber under laboratory conditions. The information does not express or imply any guarantee and Pangin Environmental reserves the right for modification without notice.

 
* The data are based on area weight of 500gsm, for more specifications, please contact our sales engineers for detailed parameters.
I Typical Applications:
Typical Applications for PPS:
 
  • Coal-fired Power generation
  • Combustion
  • Fluidized bed
  • Incineration
  • Biomass power generation
  • Metallurgical
  • And more...
  •    
    For more industry applications please contact our sales engineers for further information.
    >> Back
    Copyright © 2012 Pangin Environmental. All rights reserved. Home | Terms & Conditions | Contact | The solid performance